Skip to main content

Myst Nodes - How to Change NAT Status - MacOS

Network Configuration Issues - Strict NAT

J
Written by Joao Magalhaes
Updated over 10 months ago

One of the factors that can impact your earnings is having network configuration issues,
Learn how to change the NAT status using a few solutions outlined below.

Solution 1 - Enable Universal Plug and Play Method

👉 Note that the instructions vary depending on the model of your router, however, in most cases, UPnP is under Advanced settings of your router’s configuration page.

Solution 2 - Port Forwarding

👉 Note that the instructions vary depending on the model of your router, however, in most cases, UPnP is under Advanced settings of your router’s configuration page.

Solution 3 - Enable Network Discovery on Windows


Solution 4 - Enable DMZ ( No video support)

👉 Note that once again, instructions vary depending on the model of your router.

  1. Find your router’s IP address;

  2. Enter the IP address to your browser;

  3. Go to your router’s advanced settings;

  4. Enable the DMZ mode and insert the IP address of your host machine running the Mysterium node.

Did this answer your question?