Skip to main content

Myst Nodes - How to Change NAT Status - Windows

Network Configuration Issues - Strict NAT

Andzej Korkuz avatar
Written by Andzej Korkuz
Updated over 10 months ago

One of the factors that can impact your earnings is having network configuration issues,
Learn how to change the NAT status using a few solutions outlined below.


Solution 1 - Enable Universal Plug and Play Method

👉 Note that the instructions vary depending on the model of your router, however, in most cases, UPnP is under Advanced settings of your router’s configuration page.

Solution 2 - Port Forwarding

👉 Note that the instructions vary depending on the model of your router, however, in most cases, UPnP is under Advanced settings of your router’s configuration page.

Solution 3 - Enable Network Discovery on Windows

Solution 4 - Enable DMZ ( No video support)

In networking, a DMZ (Demilitarized Zone) is like a secure middle ground between your internal network (where your devices, like computers, are) and the internet. To enable DMZ, please follow these steps:

  1. Find your router’s IP address;

  2. Enter the IP address to your browser;

  3. Go to your router’s advanced settings;

  4. Enable the DMZ mode and insert the IP address of your host machine running the Mysterium node.

👉 Note that once again, instructions vary depending on the model of your router.

Did this answer your question?